On this page you can register to the workshops of the 1st April 2023. Make sure your registrations are not overlapping with other events. Overlapping registrations will be cancelled by the organizers.
It’s not important how good and perfect you are while doing an Endotontic treatment... sooner or later, you’ll have to face a iatrogenic error.
It could be a mistake you did, it could be a mistake someone else did.. but anyway you have to find way for solving and fixing it. Typical iatrogenic damage is a floor perforation. It can happen during access cavity preparation, during scouting calcifying canals or it would be already present in case of complex retreatment. The most important thing is understanding when and if the perforation is repairable, but also how and what materials must be used.
1st of April 2023
from 9:00 AM to 10:00 AM
MTA has been identified as the gold standard bioactive material used for sealing and filling permanently an open and wide apex. But how to do this procedure in a predictable way? How to deal with irregular anatomies? How to avoid short apical plug, material extrusion and failures? During this workshop will be shown step by step how and when perform an apical plug in a predictable way.
1st of April 2023
from 10:30 AM to 11:30 AM
It’s not important how good and perfect you are while doing an Endotontic treatment... sooner or later, you’ll have to face a iatrogenic error.
It could be a mistake you did, it could be a mistake someone else did.. but anyway you have to find way for solving and fixing it. Typical iatrogenic damage is a floor perforation. It can happen during access cavity preparation, during scouting calcifying canals or it would be already present in case of complex retreatment. The most important thing is understanding when and if the perforation is repairable, but also how and what materials must be used.
1st of April 2023
from 12:00 AM to 13:00 AM
Heat treated NiTi rotary files have shown improved properties compared to non-heat treated NiTi rotary files. They can also be used in more challenging cases, give a better canal shape and have a slightly different feel when using them. This presentation will discuss the advantages and how best to use heat treated NiTi rotary files during endodontic treatment. It will also show cyclic fatigue, bending and torsional tests comparing heat treated to non-heated treated NiTi rotary files.
1st of April 2023
from 9:00 AM to 10:00 AM
1st of April 2023
from 10:30 AM to 11:30 AM
1st of April 2023
from 12:00 to 13:00